Ubuntu

How to share and transfer files between Linux and Windows

How to share and transfer files between Linux and Windows

Previously we have shown you how to remotely connect to your Linux machine from a Windows one (Click here). Now, what if you need to transfer some files between your Windows and Linux systems?

Well, a USB drive comes handy for simple data transfers. For a large number of files at different times, you need another efficient method. Transferring your data between Linux and Windows using your local network is the recommended option. With an easy and quick one time setup, you can share your files between various machines.

File Sharing between Linux and Windows Systems

In this tutorial, we shall walk you through sharing your files between Ubuntu and Windows machines over a local network, and we shall also show you how to transfer files between Windows and Linux on the same PC.

Over the Network

Transferring files between Ubuntu and Windows can be done in many ways, but in this tutorial, we are going to discuss the following popular methods:

  1. Transfer files between Ubuntu and Windows via the SSH.
  2. Transfer files between Ubuntu and Windows using Samba.
  3. Transfer files between Ubuntu and Windows using Shared Network Folders.

Method 1: Transfer Files Between Ubuntu And Windows Via SSH

In this method, you need to install and enable SSH service on Ubuntu. Also, we need an SSH client application on Windows. In this tutorial, we shall be using Putty. Next, we are going to use the command line to share your files across the network.

Step 1. Install the SSH package on Ubuntu using the next command.

sudo apt install openssh-server

Install The Open SSH Package On Ubuntu

Step 2. After installation finishes successfully, you can check the SSH service status using the following command.

sudo service ssh status

The output of the command should look like the below screenshot:

Check The SSH Service Status

If the service is not running, you can use the following command to start it:

sudo service ssh start

Also, to enable the SSH service to start every time your system starts up, you can use the following command:

sudo service ssh enable

Step 3. Install the net-tools package.

sudo apt install net-tools

Install net-tools package

Step 4. Execute the next command to get your Ubuntu machine IP.

ifconfig

Ubuntu Machine IP

Step 5. From your Windows machine, we need an SSH client (which is Putty) and a PSCP. PSCP is considered a secure copy tool that is used alongside with Putty to transfer files securely over a network.

You can download both (Putty and PSCP) from the Putty official website. (Click here.) Kindly note that Putty will need to be installed while the PSCP won't. You have to put the PSCP.exe in the “C:\” drive to be used, as you should see shortly.

Step 6. Now open the file explorer and use the next command to start transferring your files from your Windows machine to Ubuntu.

c:\pscp "C:\Ubuntu Tutorials\Windows Shared Folder\Windows Shared Folder.txt" [email protected]:windowssharedfile.txt

Copy File From Windows To Ubuntu Via SSH

Step 7. Next, you should enter your Ubuntu password.

Enter Your Ubuntu Password

Step 8. After entering the password successfully, the command shall copy the text file from your Windows machine to your Ubuntu home. You can check your home directory now, and you should find the file there.

Check The Copied File

Step 9. Now in case you need to transfer your files from Ubuntu machine to Windows, open the file explorer from your Windows machine and use the next command. Be careful, and do not forget the dot at the end of the command.

c:\pscp [email protected]:ubuntushared .

Copy File From Ubuntu To Windows Via SSH

By executing the previous command, you should enter the password of your Ubuntu machine. Next, the file gets transferred from Ubuntu to the Windows current directory.

File Copied Successfully

Method 2: Transfer Files Via Samba

In this method, we are going to install the Samba package on Ubuntu. Moreover, use the Windows run application to connect to the Ubuntu shared directories.

Step 1. Install the Samba package on Ubuntu using the following command.

sudo apt install samba

Install Samba Package On Ubuntu

Step 2. You can set a password to the samba share as follows.

sudo smbpasswd -a hendadel

Add A User For Samba Share

where hendadel is an Ubuntu user that you shall use while accessing the Ubuntu shared directory.

Step 3. Let's create a directory that is used for sharing your files.

mkdir /home/hendadel/UbuntuSharedDir

Create Directory For The Shared Data

Step 4. Using your favorite text editor, open the samba configuration file.

sudo vi /etc/samba/smb.conf

Open Samba Configuration File

Step 5. Add the next lines at the end of the samba configuration file.

[UbuntuSharedDir] path = /home/hendadel/UbuntuSharedDir available = yes valid users = hendadel read only = no browsable = yes public = yes writable = yes

The samba configuration file should like the below:

Edit Samba Configuration File

Save and exit the samba configuration file.

Step 6. Restart the samba service using the following command:

sudo service smbd restart

Restart Samba Service

Step 7. From the Windows machine, open the run application from the Start menu and enter the Ubuntu machine IP with the shared directory name as follows.

\2.168.1.8\UbuntuSharedDir

Remote Access To Your Ubuntu

Press the OK button to continue.

Step 8. A Windows Security message will appear, you should have to enter your samba username and password. Then press the OK button to continue.

Authentication Required

Step 9. Now you should have access to your Ubuntu shared directory, and you can transfer files.

Welcome To Your Ubuntu Shared Directory

Method 3: Shared Network Folders

This is the easiest method among all. In this method, we share any folder from the Windows machine to be visible in the Ubuntu machine.

Step 1. From the Windows machine, right-click on the network connections icon in the right bottom of the taskbar.

Right Click On Network Connections

Step 2. Choose the “Open Network & Internet Settings.”

Open Network and Internet Settings.

Step 3. Next, choose “Sharing Options.”

Open Sharing Options

Step 4. Now from your current network profile, choose the following options:

Choose Options And Save Changes

Don't forget to save your changes.

Step 5. Now open your file explorer and go to the directory that you need to share. Right-click on the folder then select Properties.

Open Folder Properties

Step 6. After opening the folder properties, let's choose the Sharing tab. Also, select the Advanced Sharing button.

Open Advanced Sharing

Step 7. Mark “Share this folder” box.

Check The Share This Folder

In case you need to set permissions on the shared folder like (Read, Write), you can select the permissions button and set your permissions.

Set Sharing Permissions

Press the OK button to continue.

Step 8. Now from the Ubuntu machine, open the file browser.

From Your Ubuntu Open The File Browser

Step 9. From the left panel, choose “Other Locations.”

Open Other Locations

Step 10. In the bottom bar, enter your Windows machine IP and path to the shared folder as follows:

smb://192.168.1.6/Windows Shared Folder

Connect To Windows Shared Folder

Then press the Connect button.

Step 11. An authentication message should appear. Enter your username and password. Press the Connect button to continue.

Enter Your Windows Machine Username And Password

Step 12. Next, you should be able to see your Windows shared folder. Now you can transfer files between the two machines.

Welcome To Your Windows Shared Folder

Transferring files between Windows and Linux on the same machine

Previously, we looked at how we can share files between a Linux PC and a Windows PC over a network. Some of the utilities used included SSH, Samba, and Shared Network Folders. Here, we will look at a relatively similar situation only that this time around, it will be on the same machine.

You might be wondering why can't we copy files directly from a Linux partition to a Windows partition and Vice-versa? The simple answer is that; It will work for one but doesn't work for the other. Let's look at the reasons behind this.

Why it isn't easy

The NTFS partition format used by Windows doesn't support Linux file permissions. Therefore, we can't consider installing Linux on an NTFS partition other than the Ext4. On the other hand, Windows cannot read the Linux file system even though Linux systems can read an NTFS partition. In most cases, the Linux partition is not listed in the “This PC” section on Windows in a dual boot. Therefore, you can copy a file from the Windows partition on Linux but not the vice-versa.

A simple solution

With the above information in mind, we need to find a way to favor both operating systems and wouldn't pose any data corruption issues. For example, if you delete or alter any file in the Windows partition while accessing it with Linux, there is a high probability that Windows might raise some errors on boot.

Since Linux can't run on an NTFS or FAT32 partition and Windows can't read a Linux file system, we will need to configure a third partition that can be accessed by both operating systems. This third partition will contain commonly shared files between the two. Let's call it the SharedPartition.

We can use other methods to share files, including external storage like USB or online storage like Google Drive and DropBox. However, these are tedious as one will require a reboot to switch from one OS to another while the other method is dependent on bandwidth.

Create a SharedPartition

Whether you have an SSD or Hard drive, we will require at least Four partitions:

I believe you already have the first three. To create the SharedPartition, you can safely check our post on 'Creating or resizing partitions in Linux.' Ensure you format it to NTFS. Additionally, you might need to understand the partition Table used on your Drives. That can be GPT or MBR. Our post on 'Booting Linux or Windows from a USB drive' gives you a comprehensive guide on this. You will also understand the advantage of one over the other.

Up to here, we already have a SharedPartition that can be accessed by both Operating Systems. However, we might need to perform some configurations like Auto-mount on Linux and setting it as the default location for various files.

Configure Auto-Mount on Linux

We will need to execute several commands on the command-line. If you are just getting started with, don't panic. Please copy and paste the commands as they are below. Our Linux distribution of choice in this post is Ubuntu 20.04 LTS.

Note: Remember to replace the name SharedPartition with the label of your new partition in any of the commands.

Step 1. Install the ntfs-3g driver, which enables Linux to read and write NTFS partitions.

sudo apt install ntfs-3g

Install NTFS-3g

Step 2. Create a directory where we will mount our new partition.

sudo mkdir /media/SharedPartition

Create Mount directory

Step 3. Get the UUID (universally unique identifier) of the new SharedPartition with the command below.

sudo blkid

You should see an output like this.

Know your UUID

Copy the UUID of the SharedPartition. The UUID identifies the partition in the /etc/fstab file.

Step 4. Since we will be editing the /etc/fstab file, create a backup with the command below.

sudo cp /etc/fstab /etc/fstab.backup

Step 5. Execute the command below to edit /etc/fstab using the nano editor.

sudo nano /etc/fstab

You should see a window like the one below. Add the following line at the end but remember to replace the UUID with yours.

# SharedStorage UUID=66E53AEC54455DB2 /media/SharedPartition/ ntfs-3g auto,user,rw 0 0

Edit etc-fstab

After this step, reboot your PC. You should now see the SharedPartition mounted under the 'Other Locations' menu.

SharedPartition

Configure your Special Folders (Linux)

Special folders in Linux are those present on your Home directory. They include Desktop, Documents, Videos, etc. Execute the below command to edit their paths.

sudo nano .config/user-dirs.dirs

Special Folders

Now, we need to edit the paths to point to our SharedPartition mounted in /media/SharedPartition. For example, for Downloads, we will add the path “/media/SharedPartition/Downloads” and delete the “$HOME/Downloads” path. After applying the changes, you should have something similar to this:

Special Folders

Save your changes and close the Nano editor.

Configure your Special Folders (Windows)

Step 1. Open the File Explorer and type %userprofile% on the address bar. Hit enter.

User Profiles

Step 2. Select a folder, say Downloads, that you want to access in both operating systems. Right-click and select the properties option.

Step 3. On the pop-up window that opens, select the Location tab.

Location Tab

You will see the default path to your Downloads location.

Step 4. Click on the Move button. That will open a window where you will select your new Downloads path. Navigate to your SharedPartition and choose the Downloads folder already created in Linux. Click on the Select Folder button.

Select Destination Folder

Step 5. Click on the Apply button to set the changes.

You will see a pop-up window prompting you to move the content in the old folder to this new location. Click OK.

Apply Changes

That's it. You can now proceed to do the same for the other Folders. Now, anything you save on these folders, e.g., Documents on Windows, will be accessible on Linux in the Documents directory.

Using another partition to share files between the two operating systems is the most reliable option since Windows cannot read the Linux file system without using third-party software. With this method, you don't need to have duplicate files. Both operating systems can read and write on the same partition.

Best Linux Distros for Gaming in 2021
The Linux operating system has come a long way from its original, simple, server-based look. This OS has immensely improved in recent years and has no...
Kuinka siepata ja suoratoistaa pelisessiosi Linuxissa
Aikaisemmin pelaamista pidettiin vain harrastuksena, mutta ajan myötä pelialalla tapahtui valtava kasvu tekniikan ja pelaajien määrän suhteen. Peliala...
Parhaat pelit, joita voi seurata käsien seurannalla
Oculus Quest esitteli äskettäin loistavan ajatuksen seurannasta ilman ohjaimia. Yhä kasvavan määrän pelejä ja aktiviteetteja, jotka tukevat tukea joko...