Defrag

Optimize Drives Tool shows Never Run or Optimization not available in Windows 10

Optimize Drives Tool shows Never Run or Optimization not available in Windows 10

Windows offers disk optimization tools that can help you speed up system performance.  In fact, a lot of this is automated and can be scheduled as well. That said when you open the Disk Defragmenter or Optimize Drives tool and notice that Optimization is not available or it shows Never Run in Windows 10, here's what you can do about it.

Optimize Drives shows Never Run or Optimization not available

When you notice the last analyzed and current status, you should see Last analyzed on or run may show “Never run” and Current status  may show “Optimization not available.” Along with this, if you notice the media type of the driver carrying the status, it could display Unknown. This could also be the reason why Optimization is not available, notably if the Drive is encrypted. However, we are seeing reports in forums where users with SSDs and drives with no encryption are also facing the same problem.

Users of Windows 10 v2004 have been noticing this issue, and Microsoft is expected to fix this soon. Meanwhile, here are a few things you could try to fix this problem:

  1. Click on the Optimize button
  2. Defrag from Command Line
  3. Third Part Defragger Tool
  4. Delete Defrags's Stats Keys from Registry
  5. Remove the IDE ATA/ATAPI controllers driver in Safe Mode

Before we go ahead,  if the button is available, you may try to run it, but chances are it will not work. Some users have also reported that the status changes back to Optimization not available after a restart is complete.

1] Click on the Optimize button

First the very basic. Click on the Optimize button to run the defragmentation manually and see if makes the message go away.

2] Defrag from Command Line

Press the Start Menu, and type cmd. When the Command Prompt appears, right-click on it, and click on Run as Administrator from the context menu. Execute defrag command with /A switch to perform analysis for the specific volume

defrag c: /a

Depending on the analysis, if the result suggests defragmenting, then you can run the defrag command with /U /V switch for HDDs and /L  /O  switch for SSD. The later will run the trim command after the operation completes. You can also use the /X switch to consolidate free disk space on the volumes you specify

defrag  c: /U /V

If you can run the defragment tools from the command line, but not the user interface, then it could be a bug that is making it unavailable. A cumulative update will likely fix it, but until then, you can use use the command line option. Once you run the commands, you should see the changes once the process is complete.

3] Third-party Defragger Tool

You can use third-party defragment tools like UltraDefrag, MyDefrag, Piriform Defraggler, Auslogics Disk Defrag, Puran Defrag Free, and more to perform analysis and defragmentation of the drives. If its an SSD, make sure to read out the guide if you should be performing any sort of performance analysis on it.  Until the Optimize Drive Tool shows Never Run or you cannot run it, use these.

4] Delete Defrags's Stats Keys from Registry

You can use this tip if you have the problem after an OS upgrade or driver upgrade. It will force the OS to recreate the keys with new information. Make sure to create a system restore point as we are about to edit the registry.

Type Regedit in the Run prompt (Win +R) and press the Enter key to open Registry editor

Navigate t:

HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Dfrg\Statistics

Delete all subkeys under Statistics

Reboot your PC and open the Windows defragment tool. You should now have the Optimize button enabled.

As you can see in the above screenshot image, each of the drives I have on the PC is listed here.

The details include LastRunTime, MovableFiles, MFTSize, and other details, which are crucial when it comes to defragmentation. When you delete the keys, Windows creates all this again as a fresh start, and that should make the optimization option available.

4] Remove the IDE ATA/ATAPI controllers driver in Safe Mode

Drivers are known to cause all sorts of misconfiguration, and it could be the reason when a media type is displayed as Unknown. To resolve this, we will have to remove the controllers and reboot.

Boot into Safe Mode by pressing the Shift and then click on Restart option in the menu. It will reboot the computer into Advanced Startup Options. Select Safe mode from the option.

Once in the Safe Mode, open Device Manager using WIN + X, followed by the M key. Expand the IDE ATA/ATAPI controllers. Right-click on each of the listings, and uninstall the device. Reboot the computer, and Windows will automatically install the drivers.

Now, if you try, the optimize button should be available.

Should you remove SSDs from the defragmentation schedule?

The issue can also cause one more problem. Since it keeps forgetting when was the drives optimized, it will repeat the trimming and defrag on SSD drives, which is not good. It would be an excellent idea to uncheck the drives from the Automatic Maintenance feature.

In fact, you don't need to optimize the SSD drive at all if you have enabled the Trim feature and using OEMs software to manage it.

I hope the post was easy to follow, and you were able to optimize the Drive even though the Optimization button was not available in Windows 10

Microsoft Sculpt Touch Wireless Mouse Review
I recently read about the Microsoft Sculpt Touch wireless mouse and decided to buy it. After using it for a while, I decided to share my experience wi...
AppyMouse On-screen Trackpad and Mouse Pointer for Windows Tablets
Tablet users often miss the mouse pointer, especially when they are habitual to using the laptops. The touchscreen Smartphones and tablets come with m...
Middle mouse button not working in Windows 10
The middle mouse button helps you scroll through long webpages and screens with a lot of data. If that stops, well you will end up using the keyboard ...